product range
F82
F80
F35
FL32
F32
F22
FR12
F12
F10 AS3D
discontinued
 F3+
 F3
 F30
 F2
 F1 SXGA
 F1 XGA
 F20
 F10
  features
  3D stereo
  specifications
  brochure
  gallery
  product documentation
 F1+
display technology single chip DLP projector
LVDS DMD™ with DarkChip3™
concept prism-less field lens design
colour wheel options VizSim (wuxga, 1080, sx+)
Graphics (wuxga, sx+)
High Brightness (sx+)
resolution 1920 x 1200 (wuxga)
1920 x 1080 (1080)
1400 x 1050 (sx++)
brightness up to 3400 ANSI lumens (wuxga)
up to 3100 ANSI lumens (1080)
up to 3700 ANSI lumens (sx+)
contrast up to 4000 : 1 (on/off) (wuxga, sx+)
up to 3000 : 1 (on/off) (1080)
aspect ratio 16 : 10 (wuxga)
16 : 9 (1080)
4:3 (sx+)
displayable colours >1 Billion colours, 30 bit RGB
image processing latency ~22ms on graphics port

compatibility computer compatibility WUXGA, UXGA, SXGA+, SXGA, XGA, SVGA, VGA
1920x1080 - 640 x 480 pixel resolution
custom formats available
RGBHV, RGBS, RGsB
horizontal scan frequency 15 - 150 kHz (resolution dependant)
vertical scan frequency 48 - 190 Hz (resolution dependant)
video compatibility HDTV (1080p, 1080i, 720p)
EDTV (576p, 480p)
SDTV (576i, 480i)
NTSC, PAL, SECAM

optics lens operation Manual
standard projection lens f= 33 - 42 mm, F/2.75 - 3.07
throw ratio 1.60 - 2.00 : 1 (wuxga, 1080)
1.72- 2.20(sx+)
image size (diagonal) up to about 300
focusing distance 1.5 - 10m, 5 - 33 ft
ultra wide angle lens n/a
wide angle lens 0.95 : 1 (wuxga, 1080)
1.03 : 1 (sx+)
wide angle zoom n/a
short tele zoom n/a
long tele zoom n/a
lamp 300W UHP™ (wuxga, sx+)
300W UHP™ or 220W FusionPlus VIDI UHP™ (1080)
  lamp life 300W: up to 2000 hrs (full power), 2500 hrs (eco mode)
220W: up to 2250 hrs (full power), 3000 hrs (eco mode)
(estimated)
replacement lamp 400-0401-00

inputs / outputs computer input(s) HDMI 1.3a and DVI-D (both HDCP)
video input(s) 2x VGA, component, s-video, video
audio input(s) n/a
control and communications RJ-45 TCP/IP, 9-pin D-SUB RS232, USB
monitor redrive n/a
audio output n/a

supplied accessories cables 4m power cord (country specific)
other IR remote control
ceiling mount cable cover
remote control part no. 302-0025-00

general dimensions (d x w x h) 278 x 278 x 110 mm
weight about 3.5 kg (depending on lens)
power requirements 100 - 240VAC, 50/60Hz +/-10%
conformances CE, UL, cUL, FCC Class A
operating temperature 0 - 40C (0 - 1500m)
0 - 35C (1500 - 3000m)
operating humidity 20 - 90% RH
storage conditions 20 - 90% RH
available colours black metallic
warranty 2 years, 500 hours or 90 days on lamp (whichever comes first)
MTBF 17500 hours (expected calculated)
BTU / hr <1700

Specifications are typical, and subject to change without prior notice.
 
Product documentation
Communication protocol, New electronics platform (392)
F10, cineo10, Action! M25 user guide
Downloads
Firmware for F10 SX+
Firmware for F10 1080
Firmware for F10 WUXGA
projectiondesign as - Habornveien 53 - 1630 Gamle Fredrikstad - Norway
phone: +47 69 30 45 50 - fax: +47 69 30 45 80 - mail: